Synthesis and performance of thermoplastic polyurethane based on poly(ethylene carbonate) diol and polycaprolactone diol

This article has 0 evaluations Published on
Read the full article Related papers
This article on Sciety

Abstract

The thermoplastic polyurethane (TPU) was prepared through solution polymerization using polycaprolactone diol(PCL) and poly(ethylene carbonate) diol (PECD) as soft segment. PECD was synthesized from carbon dioxide and ethylene oxide. The effect of the relative content of PECD and PCL on the mechanical properties, resilience, solvent resistance and resistance to wet-heat aging properties of TPU was systematically investigated. The results showed that as the content of PCL increased, both the tensile strength and the elongation at break increased, reaching 66MPa and 780% when the content of PCL was 60 wt%. The fixed elongation tensile test showed that the TPU with 30 wt% PCL exhibited the optimal resilience. This result was highly consistent with the results of dynamic thermomechanical analysis(DMA), and the corresponding solvent resistance was markedly enhanced. When the PCL loading reached 50 wt%, the TPU exhibited the optimal cycling stability. PECD/PCL-TPU possessed outstanding resistance to organic solvents. Notably, the sample with 50 wt% PCL maintained a low and balanced swelling rate in toluene, ethyl acetate, butanone, water, and methanol. Thermogravimetric analysis (TGA) showed that the initial decomposition temperature (T 5% ) of all PECD/PCL-TPUs exceeded 280 ℃, indicative good thermal stability. During the wet-heat aging, these PECD/PCL-TPUs maintained a relatively high strength retention after short aging times. The results after 500 hour of aging indicated that the strength retention rate was positively correlated with the content of PECD.

Related articles

Related articles are currently not available for this article.